PM Krupp is a Manufacturer of Fully Dense Tools and High Speed Parts Used in a Variety of Industrial Applications

PSM Industries is a company that is using Powder Metallurgy technologies to create engineered materials for applications requiring extreme wear resistance and toughness. The drive is to use conventional Powder Metallurgy tooling to capture net or near net shapes in materials that previously were ingot-cast wrought products. By capturing more net shape, the result is that the number of costly secondary labor operations are reduced which translates to lower manufacturing costs.

ALLOY COMPOSITION CHART
CHEMICAL COMPOSITION by PERCENTAGE
TOOL STEEL / HIGH SPEED STEELS
ALLOY	CARBON	MANGANESE	SILICON	CHROMIUM	MOLYBDENUM	TUNGSTEN	VANADIUM	OTHER	HARDNESS (HRC)
A11 MOD (Similar to CPM10V)	2.45	0.50	0.90	5.25	1.30	_	9.75	S - .07 Max
D-2	1.40 1.60	0.60 Max	0.60 Max	11.00 13.00	0.70 1.20	_	1.10 Max	Co - 1.00 Max	60/62
M-2	0.78 0.88	0.15 0.40	0.20 0.45	3.75 4.50	4.50 5.50	5.50 6.75	1.75 2.20	P - .03 Max S - .03 Max	62/64
M3/2	1.15 1.25	0.15 0.40	0.20 0.45	3.75 4.50	4.75 6.50	5.00 6.75	2.75 3.25	P - .03 Max S - .03 Max	63/65
M4	1.25 1.40	0.15 0.40	0.20 0.45	3.75 4.75	4.25 5.50	5.25 6.50	3.75 4.50	P - .03 Max S - .03 Max	64/66
T15	1.50 1.60	0.15 0.40	0.15 0.40	3.75 5.00	1.00 Max	11.75 13.00	4.50 5.25	P - .03 Max S - .03 Max Co - 4.65 - 5.25	65/67
T-15HV	1.75 1.85	0.15 0.40	0.15 0.40	4.15 4.45	1.00 Max	11.75 13.00	6.50 6.90	P - .03 Max S - .03 Max Co - 4.9 - 5.2
T-42	1.30	_	_	4.20	3.80	10.00	3.30	Co - 10.25	66/68
T-42 HV	2.70	_	_	4.10	3.40	8.70	7.20	Co - 9.2
PX-16	1.05 1.15	0.00 0.40	0.70 0.90	3.75 4.50	4.50 5.50	6.00 6.75	1.70 2.20	Co -100 Max	63/65

STAINLESS STEEL
ALLOY	C	MN	Si	P	S	Ni	Cr	Mo	Cu	OTHER	HARDNESS (HRC)
316L	0.03 Max	2.00 Max	1.00 Max	0.045 Max	0.03 Max	10.00 14.00	16.00 18.00	2.00 3.00	_	Nitrogen .100 Max
440C	0.95 1.20	1.00 Max	1.00 Max	0.040 Max	0.03 Max	_	16.00 18.00	0.75 Max	_
17 - 4PH	0.07 Max	1.00 Max	1.00 Max	0.040 Max	0.03 Max	3.00 5.00	15.50 17.50	_	3.00 5.00	Cb + Ta .15 - .45	25/35
304	0.03 Max	1.00 Max	1.00 Max	0.040 Max	0.03 Max	7.00 9.00	16.00 18.00	_	_	_

This principle is applied at the PM Krupp division which uses a proprietary sintering process to manufacture a line of fully dense High Speed Tool Steels, in complex net shapes with harnesses' up to HRC 67 available. Hot work and shock resistant grades are used for machining plastic, wood and metal.